ROUTER BITS/SETS

47 found, showing page 2 of 2

$8.99
CM STRAIGHT ROUTER 1/8

Craftsman  1/8 in. Dia. Carbide Tipped  St
*Radius: 1/8 in.
*Overall Length: 2-1/4 in.
*Material: Carbide Tipped
*Style: Straight
*Product Type: Router Bit
*Packaging Type: Carded
*Number in Package: 1 pc.
*Usage: Wood
*Maximum Speed: 27,000 rpm
*Heat-treated alloy steel shank
*Face form and relief ground
*This replaced Ace No. 2183580 on Discovery

$12.99
CM STRAIGHT ROUTER 3/16

Craftsman  3/16 in. Dia. x 1/2 in.  Carbid
*Radius: 3/16 in.
*Overall Length: 11.3 in.
*Material: Carbide Tipped
*Style: Straight
*Product Type: Router Bit
*Usage: Wood
*Packaging Type: Peggable
*Number in Package: 1 pc.
*Shank Diameter: 1/4 in.
*Maximum Speed: 27,000 rpm
*  
*
*Length of Tip: 1/2 in.
*  
*
*Features super-sharp uniform grain carbide cutting tip to make accurate, clean cuts
*  
*
*Carbide edge can cut both hard wood and soft wood with accuracy and ease
*  
*
*Can cut a large variety of grooves and dados for versatility
*  
*
*Relief ground design offers steady and safe operation
*  
*
*Alloy steel body withstands heat to produce less vibration
*  
*
*Decreases chipping for smooth routing
*  
*
*Construction grade carbide holds on to its sharp edge
*  
*
*Carbide edge is easier to sharpen for low maintenance
*  
*
*Alloy steel bit body is heat treated for additional strength

$11.99
CM STRAIGHT ROUTER 3/4

Craftsman  3/4 in. Dia. x 25/32 in.  Carbi
*Radius: 3/4 in.
*Material: Carbide Tipped
*Style: Straight
*Product Type: Router Bit
*Usage: Wood
*Packaging Type: Peggable
*Shank Diameter: 1/4 in.
*Number in Package: 1 pc.
*Maximum Speed: 27,000 rpm
*  
*
*Bit Length: 25/32 in.
*  
*
*Made of sturdy and durable alloy steel
*  
*
*Steel is heat-treated to withstand a range of temperatures as you cut
*  
*
*Face form and relief ground for smooth operation
*  
*
*1/4 in. shank for smooth performance
*  
*
*With its 25/32-inch length, bit gives you control as you maneuver it smoothly

$13.99
CM STRAIGHT ROUTER 3/8"

Craftsman  3/8 in. Dia. x 25/32 in.  Carbi
*Radius: 3/8 in.
*Overall Length: 11.3 in.
*Material: Carbide Tipped
*Style: Straight
*Product Type: Router Bit
*Packaging Type: Peggable
*Usage: Wood
*Shank Diameter: 1/4 in.
*Number in Package: 1 pc.
*Maximum Speed: 27,000 rpm
*Heat-treated alloy steel shank
*Face form and relief ground

$9.99
CM STRAIGHT ROUTER 5/8

Craftsman  5/8 in. Dia. x 25/32 in.  Carbi
*Overall Diameter: 5/8 in.
*Radius: 5/8 Dia. x 25/32 in.
*Material: Carbide Tipped
*Style: Straight
*Product Type: Router Bit
*Usage: Wood
*Packaging Type: Carded
*Shank Diameter: 1/4 in.
*Number in Package: 1 pc.
*Maximum Speed: 27,000 rpm
*Heat-treated alloy steel shank
*Face form and relief ground

$11.99
ROMAN OGEE ROUTER 5/32"

Craftsman  5/32 in. Dia. Carbide Tipped  R
*Radius: 5/32 in.
*Material: Carbide Tipped
*Style: Roman Ogee
*Product Type: Router Bit
*Shank Diameter: 1/4 in.
*Packaging Type: Peggable
*Usage: Wood
*Number in Package: 1 pc.
*Maximum Speed: 27,000 rpm
*
*
*Carbide cutting tip delivers accurate cutting action
*  
*
*Ball-bearing pilot connected to its ends makes it easier to control the width
*  
*
*Designed to be relief ground and face form to ensure impressively smooth performance
*  
*
*Alloy steel body is treated with heat to strengthen construction
*  
*
*Uniform grain carbide contributes to its hardiness for years of reliable use
*  
*
*Versatile bit design is ideal for adding exquisite detailing for frames, panels, tabletops, horizontal rails and vertical stiles

$47.99
ROUND OVR BT 1-3/8DX3/8R

3/8 RAD ROUND OVER BIT 1/4 SH
*Overall Diameter: 1-3/8 in.
*Radius: 3/8 in.
*Overall Length: 2-3/16 in.
*Material: Carbide
*Product Type: Round Over Bit
*Bearing Diameter: 1/2 in.
*Shank Diameter: 1/4 in.
*Packaging Type: Clamshell
*Cutting Length: 5/8 in.
*Number in Package: 1 pc.
*Usage: Cuts all composition materials, plywoods, hardwoods and softwoods
*Number of Cutters: 4

$9.99
ROUNDOVR+EDG BEAD RTR1/4

Craftsman  1/4 in. Dia. Carbide Tipped  Ed
*Overall Diameter: 1/4 in.
*Radius: 1/4 in.
*Overall Length: 11.3 in.
*Material: Carbide Tipped
*Style: Roundover and Edge Beading
*Product Type: Router Bit
*Bearing Diameter: 3/8 in.
*Packaging Type: Carded
*Number in Package: 1 pc.
*Usage: Wood
*Cutting Length: 1/4 in.
*Shank Diameter: 1/4 in.
*Maximum Speed: 27,000 rpm
*
*
*Number of Cutting Edges: 2  
*  
*
*Produces smooth rounded edges and clean cuts, whether you are at the shop or the home garage
*  
*
*Combines two uses: roundover edging and edge beading
*  
*
*1/4 in. shaft works well for thin profiles and keeps router bit affordable
*  
*
*Durable and strong, made of heat-treated alloy steel
*  
*
*Rolls smoothly without chipping
*
*
*Precise movement with high user control
*  
*
*Uniform grain carbide tip so it stays sharp longer than non-carbide alternatives

$12.99
ROUTER BIT 1/2 V-GROOVE

Vermont American  1/2 in. Dia. Carbide Tip
*Overall Diameter: 1/2 in.
*Radius: 1/2 in.
*Overall Length: 1-3/4 in.
*Material: Carbide Tipped
*Style: V-Groove
*Product Type: Router Bit
*Shank Diameter: 1/4 in.
*Drill Bit Diameter: 1/2 in.
*Bearing Diameter: 1/2 in.
*Number in Package: 1 pc.
*Packaging Type: Boxed
*Cutting Length: 1/2 in.
*Angle: 90 deg.

$9.99
ROUTER BIT 1/2" COREBOX

Vermont American  1/2 in. Dia. Carbide Tip
*Overall Diameter: 1/2 in.
*Radius: 1/2 in.
*Overall Length: 1-3/8 in.
*Material: Carbide Tipped
*Style: Core Box
*Product Type: Router Bit
*Shank Diameter: 1/4 in.
*Number in Package: 1 pc.
*Bearing Diameter: 1/2 in.
*Packaging Type: Boxed
*Drill Bit Diameter: 1/2 in.
*Cutting Length: 1/2 in.

$12.99
ROUTER BIT 1/2" MORTISE

Vermont American  1/2 in. Dia. x 1/2 in.
*Overall Diameter: 1/2 in.
*Radius: 1/2 in. Dia. x 1/2 in.
*Overall Length: 1-1/2 in.
*Material: Carbide Tipped
*Style: Hinge Mortise
*Product Type: Router Bit
*Packaging Type: Boxed
*Number in Package: 1 pc.
*Shank Diameter: 1/4 in.
*Drill Bit Diameter: 1/2 in. Dia. x 1/2 in.
*Cutting Length: 1/2 in.
*Bearing Diameter: 1/2 in.

$9.99
ROUTER BIT 5/8" COREBOX

Vermont American  5/8 in. Dia. Carbide Tip
*Overall Diameter: 5/8 in.
*Radius: 5/8 in.
*Overall Length: 1-3/4 in.
*Material: Carbide Tipped
*Style: Core Box
*Product Type: Router Bit
*Drill Bit Diameter: 5/8 in.
*Shank Diameter: 1/4 in.
*Number in Package: 1 pc.
*Packaging Type: Boxed
*Cutting Length: 1/2 in.
*Bearing Diameter: 1/2 in.

$22.99
ROUTER BIT TRIM SET 3PC

Vermont American  Multi Size  Carbide Tipp
*Overall Diameter: 1/4 in.
*Radius: Multi Size in.
*Overall Length: 4 in.
*Material: Carbide Tipped
*Style: laminate trim
*Product Type: Router Bit Set
*Number in Package: 3 pc.
*Packaging Type: Boxed
*Shank Diameter: 1/4 in.
*Usage: Trimming
*Bearing Diameter: 1/2 in.
*Drill Bit Diameter: Multi Size in.
*Includes: 1/2" x 1/2" laminate trim bit, 1/2" x 1" laminate trim bit, 22 deg. bevel trim bit  
* Heat-treated shanks for durability
*Controlled depth of cut minimizes kickback

$17.99
RTR BIT 1/8R ROUNDOVER

Vermont American  1/8 in. Radius  Carbide
*Overall Diameter: 3/4 in.
*Radius: 1/8 in.
*Overall Length: 2-1/8 in.
*Material: Carbide Tipped
*Style: Round Over
*Product Type: Router Bit
*Number in Package: 1 pc.
*Shank Diameter: 1/4 in.
*Bearing Diameter: 1/2 in.
*Drill Bit Diameter: 1/8 in. Radius
*Packaging Type: Boxed
*Cutting Length: 13/32 in.

$19.99
RTR BIT 45 DEG CHAMFER

Vermont American  1-3/8 in. Dia. Carbide T
*Overall Diameter: 5/8 in.
*Radius: 1-3/8 in.
*Overall Length: 2 in.
*Material: Carbide Tipped
*Style: Chamfer
*Product Type: Router Bit
*Cutting Length: 5/16 in.
*Shank Diameter: 1/4 in.
*Packaging Type: Boxed
*Bearing Diameter: 1/2 in.
*Drill Bit Diameter: 1-3/8 in.
*Number in Package: 1 pc.
*Angle: 45 deg.

$29.99
STRAIGHT ROUTR BIT 1/2"D

1/2X1 STRAIGHT BIT *Overall Diameter: 1/2 in. *Overall Length: 2-1/8 in. *Material: Carbide *Style: Double Flute *Product Type: Straight Router Bit *Cutting Length: 1 in. *Packaging Type: Clamshell *Usage: Clean cuts in any wood or composite *Shank Diameter: 1/4 in. *Number in Package: 1 pc. *Discovery ACC, CON, NBR, SUP

$32.99
TOP BEAR TRIM BIT 1/2"D

1/2X1 TOP BEAR TRIM BIT
*Overall Diameter: 1/2 in.
*Overall Length: 2-5/8 in.
*Material: Carbide
*Style: Top Bearing
*Product Type: Flush Trim Router Bit
*Bearing Diameter: 1/2 in.
*Number in Package: 1 pc.
*Packaging Type: Clamshell
*Cutting Length: 1 in.
*Usage: Cuts all composition materials, plywoods, hardwoods and softwoods
*Shank Diameter: 1/4 in.

Page